Hayati Quokka Lite Pod Kit

Light body, bright colours

Polycarbonate keeps the Lite down to 46.36g, against 54.07g for the aluminium Quokka Elite and 77.3g for the zinc alloy Quokka Pro. The colour list leans brighter too: Neon Yellow, Vivid Violet, Sky Blue and Mint Green sit beside Shadow Black, Pearl White, Baby Pink and Quokka Colour.

The saving in weight does not come out of the battery. At 1,100mAh, the Lite matches the capacity of the Pro and the Elite, so the gap between them is in the shell, the controls and the charging current. Set against the Elite, the Lite gives up the metal body and the second pod in the box, and brings the adjustable airflow that Hayati highlights.

Set the draw with the airflow

Adjustable airflow is the feature Hayati picks out for the Lite. Opening it up gives a looser, airier pull, and closing it down tightens the draw, so you can set the device to the way you like to vape. Along with the low weight, it is the Lite's headline feature. Power runs from 12 to 22W in Quokka Mode, the same band the Elite uses.

The Lite comes with one 0.8 ohm Quokka pod. On that coil, Hayati's guidance is 0 to 12mg for freebase in a 30/70 or 40/60 PG/VG mix, and 20mg for 50/50 nic salts. If your e-liquid falls outside that, a 0.6 or 1.2 ohm Quokka pod may suit it better.

Charging and what is in the box

The charging current is 1A, half the 2A of the Pro and the Elite. Hayati's packing list for the Lite names the device, one 0.8 ohm Quokka pod and a user manual, and the brand lists the whole Quokka pod family as compatible.

For a first refillable kit, the Lite keeps things simple: one pod in the box, one listed mode and an airflow control you can set once and leave. Every Quokka pod holds 2ml and fills from the side, so a refill needs nothing more than a bottle of e-liquid.

Being refillable, the Lite takes bottled e-liquid, for example 20mg Hayati Pro Max Nic Salts, or the 70VG/30PG Hayati shortfill at 0mg, which sits in the brand's freebase range for the 0.8 ohm pod. The Lite is for adults 18 and over, and nicotine is highly addictive.

How to fill the pod and start

1. Take the rubber stopper off the mouthpiece and the sticker off the base of the pod.
2. Open the stopper on the side of the pod, fill it with e-liquid and close the stopper again.
3. Slide the pod into the device and give the coil a few minutes to soak before you vape.
4. Draw on the mouthpiece to vape. There are no buttons: Quokka Mode picks the power for the pod.
5. Use the airflow slider to set the draw: closed for a tighter mouth-to-lung draw, open for a looser one.

Charging is by USB-C, through the port on the side. A cable is not in the box, so use one you already have.